A storage tank is two different coating problems. The external shell faces atmospheric corrosion and UV; the internal surface faces the stored product, which may be hydrocarbons, process water, or a corrosive intermediate. The product, the operating temperature and any cleaning regime determine the internal lining, and none of these can be assumed.
Home/Application scenarios/Petrochemical storage tanks
Petrochemical storage tanks
Internal and external protection for carbon steel tanks holding crude, refined products and process water.
Petrochemical storage tanks — Internal and external protection for carbon steel tanks holding crude, refined products and process water. Service environment: C5-I / immersion, chemically aggressive; typical design life: 10–20 years by product. The table below lists the recommended coating build-up and links to the matching product categories and selectable products.
CorrosivityC5-I / immersion, chemically aggressive
Typical service life10–20 years by product
Recommended coating system
| Layer | Type & DFT | Product examples |
|---|---|---|
| External primer | Zinc-rich epoxy or zinc silicate, 60–80 µm | Zinc-based primer |
| External topcoat | Polyurethane or epoxy, 60–120 µm | PU / epoxy topcoat |
| Internal lining | Pure or novolac epoxy, 2 coats, 300–400 µm | Tank lining epoxy |
| Special cases | Glass-flake or vinyl ester for aggressive media | Glass-flake lining |
Application critical points
- Confirm the internal lining against the actual stored product and operating temperature — a lining approved for one medium is not automatically suitable for another.
- Tank bottom plates and the first shell ring are the highest-risk areas; specify and inspect them separately from the shell.
- For tanks that will be entered, ensure the coating is compatible with the confined-space entry and ventilation plan, and allow full cure before filling.
Related product categories
Related products from the brands used in this scenario
Related brands & products
Frequently asked questions
Which coating system is recommended for Petrochemical storage tanks?
The recommended build-up is: External primer; External topcoat; Internal lining; Special cases.
What is the service environment for Petrochemical storage tanks?
Service environment: C5-I / immersion, chemically aggressive; typical design life: 10–20 years by product.
Which brands are covered by this scenario?
Brands covered by this scenario: AkzoNobel International, JOTUN, HEMPEL, CMP, ZINDN.
Articles are compiled by RichTech from publicly available manufacturer materials and field practice, for selection reference only; the latest official technical data sheets (TDS) prevail.
Not sure which product fits? Tell us the substrate and service conditions
Share your substrate, corrosivity category and target service life — we will come back with a coating system and quantity estimate.